- The union of high-accuracy high-speed coil processing and bending
-A coiling torsion machine for wire diameters of 0.02 mm to 0.3 mm
-Has coil processing ability equivalent to that of coiling machines.
-Three 3D slides enable freedom of bending. The operations required for tool changers and R servos can be assigned to each of the three 3D slides.
- Free modular design
-The system enables different units to be attached to each of the three 3D slides. Can be replaced with various optional units.
- A variety of attractive optional units
-Feed pressure servo unit
-Roller servo point unit
-Ultra-thin wire guide holder
- Dedicated MNO Program for Spring Production
-Easy operations for quicker preparation.
-High resolution for controlling the latest servo motors.
-Allows varied control based on measurement results, such as the pitch and diameter.
-Common program for both torsion machines and coiling machines.
-Includes a motor sensor system.
-Versatile production management screen and production data collection function.
|Standard supported wire diameter||0.02～0.3mm|
|Maximum outer diameter||8|
|D/d||3.5 or higher|
|Supported wire diameter when using an ultra-thin holder (OP)||0.02～0.1mm|
|Left/right 3D table axis||0.0001mm|
|Up 3D slide axis||0.001mm|
|Tool changer axis||0.001°|
|R Servo Axis||0.001°|
|Solenoid valves||4pcs(Max 8pcs available)|
|Service air pressure||Max 0.5Mpa|
|Power source||3-Phase, AC 200V, 45A|
|Control device||OS Windows|
|Display||17'' TFT color LC Display|
|External memory||USB memory|
Click here to contact us if you have any questions related to Spring products.
- MEC Spring Machine Division
- 1-17-24 Kamiaoki Nishi, Kawaguchi-shi, Saitama 333-0845, Japan
- TEL:048-256-3511 FAX：048-256-3595