The LCC 92HT is an NC Straightener feeder that provides everything that users at stamping sites could need.

The stock size is limited to 250 mm or less, enabling costs to be reduced to a dramatic extent that has never been seen before.

Take a look at this unprecedented cost performance.

LCC 92HTの写真

  • TP-CCS Controller

    A wide variety of information needed for planning, operation, maintenance, etc, is uniformly controlled under the base mode of “Settings, Planning, Operaion, and Maintenance”. Equipped with various new operations, it is a complete operation system that responds to diversification and sophistication of merchandise and reduction of work time.

    more

  • Large straightening roll adjustment wheels

    Large straightening roll adjustment hand wheels have been adopted. Symbols are used for the indicators, improving repeatability and permitting easy numerical setting.

  • Space-saving design

    This design requires approximately 15% less installation space for the straightener (compared to previous Oriimec models). The efficient use of space enabled by this downsizing allows safer and more efficient work.

  • Includes high output AC servo motor

    The straightener/feeder, the heart of the unit, includes a 4.4 kW AC servo unit with a high output usually seen only in larger models.

Stock Thickness mm 1.2~6.0
Stock Width mm 70~250
MAX.Coil Mass kg 2,500
MAX.Coil O.D. mm 1,400
Coil I.D. mm 508
Feed Length mm ~500※
MAX.Line Speed m/min 22
Work Roll Number upper3/lower2
Main Motor kW AC4.4
Mandrel Expansion pneumatic
Reel Motor kW 2.2
Power V 200/220
Operating Air MPa 0.49

※In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option) must be provided.

Stock Thickness(mm)
1.2~5.0 6.0
Stock Width(mm) 250 200

※The above figures are for the material having yield strength of 245N/mm2.

DownLoad

  • Maximizes downsizing
    Stock width: 50 mm to 300 mm Maximum stock thickness: 3.2 mm
  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm, 400 mm Maximum stock thickness: 3.2 mm
  • Includes the first ASC mechanism in the industry for enhanced performance
    Maximum stock width: 300 mm, 400 mm Maximum stock thickness: 3.2 mm
  • A product line with enhanced economic efficiency
    Maximum stock width: 400 mm to 600 mm Maximum stock thickness: 3.2 mm
  • The HF series' high-performance model
    Maximum stock width: 400 mm to 1,000 mm Maximum stock thickness: 4.5 mm
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm to 1,000 mm Maximum stock thickness: 3.2 mm
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm to 1,000 mm Maximum stock thickness: 4.5 mm

  • Press Room Automation Sales Management Department
    6 Suzukawa, Isehara-shi, Kanagawa, 259-1198, Japan
    TEL:0463-91-3505 FAX:0463-93-3573
  • Overseas Sales Management Department
    6 Suzukawa, Isehara-shi, Kanagawa, 259-1198, Japan
    TEL:0463-91-2800 FAX:0463-91-0806