This equipment can handle plate with a thickness of up to 12.0 mm.

These super machines are the most advanced equipment of the series.

Their sturdy form symbolizes their superior performance and tremendous reserves power.

LCC GD/GD2 Seriesの写真

  • TP-CCS Controller

    A wide variety of information needed for planning, operation, maintenance, etc, is uniformly controlled under the base mode of “Settings, Planning, Operaion, and Maintenance”. Equipped with various new operations, it is a complete operation system that responds to diversification and sophistication of merchandise and reduction of work time.

    more

  • GD2

    A renewed lineup with a full complement of NC straightener feeder for thick stock. Nine-work roll specifications.

  • Easy Access to Work Rolls (LCC06GD2)

    The work rolls on the GD2 can be opened to a maximum of 20 degrees, making roll cleaning much easier. The machine was designed to allow easy access to the inside structure for improved maintenance.

  • 9 Work Rolls (LCC06GD2)

    The GD2 represents a new standard in feeding technology, with the ability to handle plate up to 12.0mm thick. Combining the power of the heavy-duty GD unit with the straightening performance of 9 work rolls (5 upper and 4 lower), the GD2 gives material a high degree of flatness.

Model LCC 05GD LCC 08GD LCC 06GD2
Stock Width (mm) 70~500 70~800 70~600
Stock Thickness (mm) 1.4~12.0 1.4~12.0 1.4~12.0
MAX.Coil Mass (kg) 5,000 5,000 5,000
MAX.Coil O.D. (mm) 1,600 1,600 1,600
Coil I.D. (mm) 508 508 508
Feed Length (mm) ~500 ~500 ~500
MAX.Line Speed (m/min) 18 18 18
Work Roll Number upper3 / lower3 upper3 / lower3 upper5 / lower4
Main Motor (kW) 15.0 15.0 30.0
Mandrel Expansion hydraulic hydraulic hydraulic
Reel Motor (kW) 3.7 3.7 5.5
Power (V) 200/220 200/220 200/220
Operating Air (MPa) 0.49 0.49 0.49

※:In case Feeding Length exceeding Specification, MASTER CONTROL Function (Option) must be provided.

Model LCC 05GD LCC 08GD LCC 06GD2
Roll length
(mm)
520 820 620
Stock Thickness
(mm)
1.4~4.5 500 800 600
5.0
6.0
7.0 760
8.0 610
9.0 480 480 480
10.0 390 390 390
11.0 320 320 320
12.0 270 270 270

※The unit in the above table is represented in millimeters.
※The above figures are for the material having yield strength of 245N/mm2 and feed speed in the situation indicated is 0.695m/s.

  • Maximizes downsizing
    Stock width: 50 mm to 300 mm Maximum stock thickness: 3.2 mm
  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm, 400 mm Maximum stock thickness: 3.2 mm
  • Includes the first ASC mechanism in the industry for enhanced performance
    Maximum stock width: 300 mm, 400 mm Maximum stock thickness: 3.2 mm
  • A product line with enhanced economic efficiency
    Maximum stock width: 400 mm to 600 mm Maximum stock thickness: 3.2 mm
  • The HF series' high-performance model
    Maximum stock width: 400 mm to 1,000 mm Maximum stock thickness: 4.5 mm
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm to 1,000 mm Maximum stock thickness: 3.2 mm
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm to 1,000 mm Maximum stock thickness: 4.5 mm
  • The best match for small, thick stock
    Stock width: 70 mm to 250 mm Maximum stock thickness: 6.0 mm

  • Press Room Automation Sales Management Department
    6 Suzukawa, Isehara-shi, Kanagawa, 259-1198, Japan
    TEL:0463-91-3505 FAX:0463-93-3573
  • Overseas Sales Management Department
    6 Suzukawa, Isehara-shi, Kanagawa, 259-1198, Japan
    TEL:0463-91-2800 FAX:0463-91-0806