The SH-3A, a multifunctional coiling machine with 1-point coiling, torsion attachment, and an initial tension servo, has further evolved. This coiling machine can now process an even greater range of torsion springs.

SH-3Aの写真

  • 1-point coiling with a wire diameter of 0.08 to 0.3 mm

    -Equipped with 8 standard axes: feed, cut, pitch, point, torsion, initial tension, coil front-back, and MSD.

    -Easier setup and greater speed than previous models, as the cut axis and torsion axis are separated.

    -Suitable for high-speed production of ballpoint pen springs, torsion springs, and elliptical springs in addition to standard cylindrical springs.

    -Optional ultra-thin wire attachment can be used to coil springs with a diameter of 0.08 mm or less.

  • Dedicated MNO2 Program for Spring Production

    -Easy operations for quicker preparation.

    -High resolution for controlling the latest servo motors.

    -Compatible with compression spring creation programs based on line graphs.

    -Allows varied control based on measurement results, such as the pitch and diameter.

    -Common program for both torsion machines and coiling machines.

    -Includes a motor sensor system.

    -Versatile production management screen and production data collection function.

  • 3 types of wire guides

    The SH-3A has 3 wire guides with different lengths:

    -Short guide with a guide length of 23 mm
    Provides greater accuracy for short springs due to its shorter guide length, while retaining the same clearance length as a standard wire guide.

    -Standard wire guide with a guide length of 30 mm
    Enables use of all tools available for the previous SH-3,SH-3Ⅱ wire guide.

    -Wire guide for ultra-thin wires with a guide length of 16 mm
    Enables coiling of wires with a diameter of 0.08 mm or less.

  • Taper synchronization constant

    Enables the taper tilt to be managed with a value from 0 to 100.
    Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.

  • Optional Equipment

    -Ultra-thin wire attachment

    -3-dimensional bending servo unit to improve stability and speed when creating antenna springs

    -Capacitance level sensor

    IS-1 shape detection unit with camera

Model SH-3A
Standard Wire Dia. 0.08~0.3mm
Outside Dia. 10mm
D/d 4 or more
Ultra Fine Wire A/T Wire Dia. 0.05~0.1mm
Feed Axis Resolution 0.0001mm
Cut Axis Resolution 0.001°
Pitch Axis Resolution 0.0001 mm
Point Axis Resolution 0.0001 mm
Torsion A/T Axis Resolution 0.001°
Initial tension Axis Resolution 0.0001 mm
Arbor Axis Resolution 0.0001mm
立体曲げサーボ軸(OP) 最小入力 0.001°
Solenoid valves 4pcs(Max 8pcs available)
Air requirements Max 0.5 MPa
Power source AC 200V 3-Phase, 15A
Net weight 360kg
Control device Max. 10-axis to be controlled by computer - OS Windows
Display 15.6" Full HD touch panel
External memory USB thumb drive
Service Temp. 0~40℃

MEC Spring Machine Division
1-17-24 Kamiaoki Nishi, Kawaguchi-shi, Saitama 333-0845, Japan
TEL:048-256-3511 FAX:048-256-3595