- 1-point coiling machine with a wire diameter of 0.1 to 0.8 mm
-Maximum outer coil diameter of 20 mm
-Equipped with 7 standard axes: feed, cut, pitch, point, torsion, initial tension, and MSD.
-Optional core forward/reverse servo unit provided.
-Easier setup and greater speed than previous models, as the cut axis and torsion axis are separated.
-Suitable for high-speed production of torsion springs and elliptical springs in addition to standard cylindrical springs.
- Dedicated MNO2 Program for Spring Production
-Easy operations for quicker preparation.
-High resolution for controlling the latest servo motors.
-Compatible with compression spring creation programs based on line graphs.
-Allows varied control based on measurement results, such as the pitch and diameter.
-Common program for both torsion machines and coiling machines.
-Includes a motor sensor system.
-Versatile production management screen and production data collection function.
- Taper synchronization constant
Enables the taper tilt to be managed with a value from 0 to 100.
Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.
- Optional Equipment
-Core forward/reverse servo unit
-Slip sensor to detect slips in wire feeding
-Capacitance level sensor
–IS-1 shape detection unit with camera
|D/d||4 or more|
|Max. Speed||170 m/min|
|Pitch Axis||Resolution||0.0001 mm|
|Point Axis||Resolution||0.0001 mm|
|Torsion A/T Axis||Resolution||0.001°|
|Initial tension Axis||Resolution||0.0001 mm|
|Arbor Axis (Option)||Resolution||0.001mm|
|Solenoid valves||4pcs(Max 8pcs available)|
|Service air pressure||Max 0.5 MPa|
|Power source||AC 200V, 3-Phase, 15A|
|Control device||Max. 10-axis to be controlled by computer - OS Windows|
|Display||15.6" Full HD touch panel|
|External memory||USB thumb drive|
Click here to contact us if you have any questions related to Spring products.
- MEC Spring Machine Division
- 1-17-24 Kamiaoki Nishi, Kawaguchi-shi, Saitama 333-0845, Japan
- TEL:048-256-3511 FAX：048-256-3595